ECM MANUFACTURE Mechanika Tap Seal Kit - V2
COMPONENTS
1x Blind Blank Gasket 9x6.5 - 9mm x 6.5mm - SILICONE - ECM P6000.7
2x O-Ring 0112 - 15.16mm x 9.92mm x 2.62mm - SILICONE - 1786049
1x Conical Seal - OD 14mm x ID 7mm x H 6mm - PTFE TEFLON - P6010 - 1186378
1x O-Ring 0114 - 14.67mm x 11.11mm x 1.78mm - EPDM - 1186626
1x O-Ring 0115 - 17.15mm x 11.91mm x 2.62mm - EPDM - 1186805
1x O-Ring 0106 - 10.31mm x 6.75mm x 1.78mm - EPDM - 3243009
7x Items in Total
O-Ring 0114 may already be fitted to the Conical Seal so it may appear like there are only 6 Items.
IMPORTANT
O-Ring 0114 may already be fitted to the Conical Seal so it may appear like there are only 6 Items
O-Ring 0115 will only be required if your machine has an o-ring to seal the ball joint of your steam arm / water arm. If your machine has teflon gaskets fitted to the ball joint nut then keep these in place - the o-ring 0115 will not be required.
COMPATIBILITY
KITECMMech-TAP-01, KITECMMech-TAP-02
SUITABILITY
ECM MECHANIKA SLIM
ECM MECHANIKA V SLIM
ECM MECHANIKA VI SLIM
ECM MECHANIKA SLIM PID
IMPORTANT
Please check that this is the correct product for your machine - we do NOT accept returns or exchanges of this product.
